Télécharger Imprimer la page

Keysight PV8900 Serie Guide D'utilisation Et De Maintenance page 217

Simulateurs de groupe photovoltaïque

Publicité

Les langues disponibles

Les langues disponibles

STATus Subsystem
Status register programming lets you determine the operating condition of the instrument at any time.
The instrument has three groups of status registers; Operation, Questionable, and Standard Event. The
Operation and Questionable status groups each consist of the Condition, Enable, and Event registers
as well as NTR and PTR filters.
The Status subsystem is also programmed using Common commands. Common commands control
additional status functions such as the Service Request Enable and the Status Byte registers. Refer to
Status Tutorial
for more information.
STATus:OPERation[:EVENt]
Queries the
event register
(latches) all events that are passed by the Operation NTR and/or PTR filter. Reading the Operation
Status Event register clears it.
Parameter
(none)
Read the operation status event register: STAT:OPER?
The value returned is the binary-weighted sum of all enabled bits in the register.  For example, with
l
bit 3 (value 8) and bit 5 (value 32) set and enabled, the query returns +40.
*RST has no effect on this register.
l
STATus:OPERation:CONDition?
Queries the
condition register
the live (unlatched) operational status of the instrument. Reading the Operation Status Condition
register does not clear it.
Parameter
(none)
Read the operation status condition register: STAT:OPER:COND?
The value returned is the binary-weighted sum of all enabled bits in the register.  For example, with
l
bit 3 (value 8) and bit 5 (value 32) set and enabled, the query returns +40.
The condition register bits reflect the current condition. If a condition goes away, the cor-
l
responding bit is cleared.
*RST clears this register, other than those bits where the condition still exists after *RST.
l
Keysight PV8900 Series Operating and Service Guide
for the
Operation Status
Typical Return
for the
Operation Status
Typical Return
5 SCPI Programming Reference
group. This is a read-only register, which stores
<bit value>
group. This is a read-only register, which holds
<bit value>
217

Publicité

loading

Ce manuel est également adapté pour:

Pv8921aPv8922aPv8931aPv8932a