Publicité
Les langues disponibles
Les langues disponibles
3 Getting Started
Use the On/Off key to enable the output. If a load is connected to the output, the front panel display
will indicate that it is drawing current. Otherwise, the current reading will be zero. The status indicator
shows the output's status. In this case, "CV" indicates the output is in constant voltage mode.
For a description of the status indicators, refer to
Front Panel Display at a
Glance.
Use Built-in Help System
Press the Help key at the lowest menu level to display help information about the menu function
controls.
Whenever a limit is exceeded or any other invalid configuration is found, the instrument will display a
message, including Error code information.
Press Meter or Back to exit Help.
84
Keysight PV8900 Series Operating and Service Guide
Publicité
