HOLZMANN MASCHINEN SB 2516H Mode D'emploi page 34

13.3.2 Table
Loosen clamp bolt (12). Now you can adjust the table in height
by turning the handle (13). Fix the table with clamp bolt (12) in
the chosen position.
To tilt of the operating table, loosen the screw (hexagon or
quick release on the bottom of the table) and adjust by using
the angle scale on the desired inclination. Fix it again in the
selected position.
13.3.3 Boring depth
For example:
 Clamp a drill into the drill chuck.
 Loosen the depth scale.
 Now put the workpiece onto the table, turn the table upwards until the drill touches the
workpiece.
 Adjust the depth scale to zero.
 Now turn the handle, until the scale reaches indicates the boring depth required. Bring the
drill back into upper position
 Now tighten it.
 The boring depth is now limited to the depth chosen.
You can adjust the depth also with an own method.
14 MAINTENANCE
Don't clean or do maintenance on the machine while it is still connected to
the power supply:
Damages to machine and injuries might occur due to unintended switching
on of the machine!
Therefore: Switch the machine off and disconnect it from the power supply
be-fore any maintenance works or cleaning is carried out
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Before first operation as well as later on every 100 operation hours you should lubricate all con-
necting parts (if required, remove beforehand with a brush all swarfs and dust).
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the saw band and the saw band guide.
The good condition and perfect adjustment of the guiding rollers is essential for a smooth band
guidance and a clean cut.
Store the machine in a closed, dry location.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a
pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
HOLZMANN MASCHINEN GmbH
N O T I C E
www.holzmann-maschinen.at
A T T E N T I O N
MAINTENANCE
34
SB 2516H