SICK GTB20 Manuel D'utilisation page 30

OPERATING INSTRUCTIONS
4 Mounting
en
30 O P E R A T I N G I N S T R U C T I O N S | GTB20
Mount the sensor using a suitable mounting bracket (see the SICK range of accesso‐
ries).
NOTE
Note the following maximum permissible tightening torque.
0.6 ... 0.8 Nm
0.4 ... 0.5 Nm
0.8 ... 1.3 Nm
1
Figure 2: Tightening torque
See table 3 and table 4.
1
CAUTION
Please provide adequate strain relief externally for the cable if necessary. The back
cover must be completely sealed before operation.
Note the preferred direction of the object relative to the sensor, cf.
page 30.
Figure 3: Alignment of the sensor relative to the object direction
< 0.4 Nm
see figure 3,
8026846.1LP5/2024-05-06 | SICK
Subject to change without notice