Grundfos SP Serie Notice D'installation Et De Fonctionnement page 7

SP with motor
These Directives and standards apply from 4th
June 2019 and onwards.
— Machinery Directive (2006/42/EC). Standard
used:
EN 809:1998 + A1:2009.
— Low Voltage Directive (2014/35/EU). Standards
used:
EN 60204-1:2018
EN 60335-1:2012 + A11:2014
EN 60335-2-41:2003 + A1:2004 + A2:2010
— EMC Directive (2014/30/EU).
Standards used:
EN 60034-1:2010
EN 55011:2009+A1:2010
(Applies only to motors with Tempcon sensors.)
— Ecodesign Directive (2009/125/EC).
Water pumps:
Commission Regulation No 547/2012.
Applies only to water pumps marked with the
minimum efficiency
index MEI. See pump nameplate.
Applies from 22.07.2019.
— RoHS Directives (2011/65/EU and
2015/863/EU) Standard used:
EN 50581:2012
SP bare shaft pump
These Directives and standards apply from 4the June
2019 and onwards.
— Machinery Directive (2006/42/EC).
Standard used:
EN 809:1998 + A1:2009.
— Ecodesign Directive (2009/125/EC).
Water pumps:
Commission Regulation No 547/2012.
Applies only to water pumps marked with the
minimum efficiency index MEI. See pump
nameplate.
Before the pump is taken into operation, the
complete machinery into which the pump is to be
incorporated must be declared in accordance with
all relevant regulations.
Applies from 22.07.2019.
— RoHS Directives (2011/65/EU and 2015/863/EU)
Standards used :
EN 50581:2012
This EC/EU declaration of conformity is only valid when
published as part of the Grundfos installation and
operating instructions (publication number: 98076750,
98074911 and 98074867).
Bjerringbro, 4th June 2019
Frank S. Madsen
Engineering manager
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Person authorised to compile technical file and
empowered to sign the EU declaration of conformity.
7