Publicité
Les langues disponibles
Les langues disponibles
4. Installation of water tray elements
Place the suspension slot of the water tray elements directly on the
hooks against the holder. The seal ring located at the bottom of the
bin should be directed toward the entrance of the water valve
members; insert it in the corresponding position with an angle of
inclination of 45 °.
VI. MAINTENANCE AND CLEANING
DEFROST
Defrosting the freezer
Note: Care must be taken when performing the
procedure below.
- The device contains no frost. Defrosting the freezer is not necessary.
However, in the unlikely event that the unit defrosting is necessary,
please follow the steps below:
- Try to use as much food stored in the freezer as possible before
making the icing.
- However, for the remaining food, wrap them in newspaper and keep
them apart until you can put them in the freezer, once it cleaned.
- Turn off by unplugging the power supply plug from the socket sector.
- Open the freezer door.
- Place a container adapted to collect water from the frost moltn.
- After defrosting, clean and dry the interior of the freezer.
- Put the unit and store it all frozen food.
Defrosting can be accelerated by putting hot water bowls (not boiling) in the
freezer and removing the frost with a suitable plastic scraper.
EN-25
Publicité
