Publicité
Les langues disponibles
Les langues disponibles
If the refrigerator door is too low:
Open the door, using a wrench turn the adjusting nut counterclockwise
to clockwise to raise the door. Once the doors are aligned, tighten the
locking nut by turning in the opposite direction of clockwise.
If the refrigerator door is too high:
Open the door, using a wrench turn the adjusting nut in the direction of
clockwise to lower the door. Once the doors are aligned, tighten the
locking nut by turning in the opposite direction of clockwise.
F. INDICATION OF TEMPERATURE
To help you properly adjust your device, it is
equipped with a temperature gauge located in the coldest part.
For food storage in the refrigerator, especially for the coldest area, make
sure that "OK" appears on the temperature indicator.
The symbol on the left shows the location of the coldest area in
the refrigerator. It specifies the height of the area.
If "OK" is not displayed, the mean temperature of this area will be
very high. You must then adjust the thermostat to a colder setting
value.
At each change of thermostat, please wait until the temperature has
stabilized inside the unit before proceeding, if necessary, to a new
setting. gradually change the position of the thermostat and wait at least
12 hours to perform a new audit.
At each change of thermostat, please wait until the temperature has
stabilized inside the unit before proceeding, if necessary, to a new
setting. gradually change the position of the thermostat and wait at least
12 hours to perform a new audit.
NoteAfter having filled the device with fresh food or after having opened
repeatedly or for a long time the doors of the unit, it is normal that the
inscription "OK" does not appear on the temperature indicator . Wait at
least 12 hours before adjusting the thermostat.
EN-21
Publicité
