KBS Gastrotechnik Olitrem Marecos HORECA Serie Mode D'emploi page 39

EN
Press the "mute" button to turn the alarm off and wait 12 hours for the
temperature to stabilize. If the set temperature has not been reached within this
time, please contact our technical service.
The following messages may appear on the thermostat:
Message
To switch off, press the ON/OFF button (information "OFF" on the display,
equipment off) or disconnect the plug from the mains. Wait 10 minutes before
turning the equipment back on.
MODO (ENS (ENERGY SAVING)/ECO (WHERE APPLICABLE)
ENS/ ECO - Energy saving - after 2 hours without opening the door, the equipment
automatically switches to Energy saving, turning off the light and increasing the set
point by + 3°C. After 4 hours, the cabinet will return to the normal temperature. To
switch from ENS/ECO to normal operation, simply open the door for more than 10
seconds or press the ES button on the digital
(switch ON, light always on).
When fully loading the cabinet, it is possible for the alarm to go off after 2 hours if
it has not reached the set temperature, and "Hi" is visible in the display. Press the
"mute" button to turn the alarm off and wait 12 hours for the temperature to
stabilize. If the set temperature has not been reached within this time, please
contact our technical service.
38
Operating Message
E0
E1
L0
HI
DF
OFF
Dor
ENS
PJS4C4H001
Description
Ambient Probe Failure
Defrost Probe Failure
Low Temperature Alarm
High Temperature Alarm
Defrosting in progress
Standby
Open Door
Energy Saving Mode