KBS Gastrotechnik Olitrem Marecos HORECA Serie Mode D'emploi page 36

- Apply stainless steel feet or rollers to the holes in the lower part of the unit using
an Allen key;
- Place the handle on the rear and the door of the appliance by tightening the
screws in the holes.
- Before placing the shelves, apply the brackets provided inside the equipment to
the respective shelf rails.
- Place the recipient provided inside the equipment under it, according to the
following image.
Ensure that the drain pipe is directed towards the recipient.
- Application of a bottle cap catcher:
To Place:
1 – Insert lower groove into the bracket
2 – Pull itu p and engage the upper groove
on the bracket
3 – Lower the catcher
To Remove:
1 – Make the catcher go up
2 – Dislodge from the upper groove
3 – Lower the catcher until it comes out of
the lower bracket
EN
35