KBS Gastrotechnik Olitrem Marecos HORECA Serie Mode D'emploi page 35

EN
Never move the equipment with products inside. Before moving the equipment,
unplug the equipment from the socket and remove the products from inside,
storing them away.
After proper storage, check that the power cord is not damaged. A damaged power
cord may cause electric shock or fire. If the power cord is damaged, it must be
replaced by the manufacturer, authorized dealer, or qualified personnel in order to
avoid danger.
3.3. POSITIONING OF THE EQUIPMENT
The equipment must be installed in a dry and ventilated area, on a levelled floor
with the capacity to support its weight, including its maximum load. It must be
positioned so that the plug is accessible.
You should avoid moving the cabinet when it has products inside.
Install the equipment leaving 5 cm between the appliance and any other furniture
or wall, thus allowing for a natural circulation of air.
In order to reduce energy consumption, the equipment should be kept away from
any source of heat and out of direct sunlight. Do not obstruct the lower and/or
upper fan grills to allow for ventilation and maintenance.
3.4. APPLICATION OF ACCESSORIES
The following accessories must be installed as applicable:
- Apply the two levellers underneath the equipment at the front by screwing them
into the two holes;
34
5 cm
5 cm 5 cm 5 cm