EN
3.5. BEFORE SWITCHING ON
Before you start the appliance for the first time, you should clean it inside with a
non-alkaline cleaning solution (do not use corrosive products) and then dry
thoroughly. The equipment must be disconnected from the mains while this is
done.
3.6. CONNECT TO THE MAINS
Before connecting the equipment to the mains, check that the voltage and
frequency are in accordance with the specifications on the rating plate. The
appliance must be connected to an earthed socket; ensure that the connecting
cable does not become entangled.
If the length of the cable is not enough, it should be replaced by a qualified person.
Do not use an extension cord.
4. OPERATION
4.1. DIGITAL THERMOSTAT MODELS
PYOL1H0531
36
4.1.1. CAREL EASY
ON/OFF Button
Defrost
Set/Change
Led
Function
1
Compressor
2
Fan
3
Defrost
4
Auxiliary Output
5
Clock (RTC) (some models)
6
Alarm
7
Algorithms
Light Button
PY0L2K0532