baltur BGN 40 LX-V Mode D'emploi page 43

Ignition electrode
X = Disk/head distance
(see diagram relative to the specific burner model)
NOTE: if the distance "X" is reduced the NOx emissions value
falls. Always adjust the distance "X" between the minimum
and maximum valuesspecified in the work field.
BGN 40 LX / LX-V ELECTRODES ADJUSTMENT DIAGRAM
COMBUSTION HEAD ADJUSTMENT DIAGRAM
1 - Ionisation electrode
2 - Ignition electrode
3 - Flame disk
4 - Gas diffuser
5 - Gas delivery pipe
Burner fixing flange
Burner's head adjustment knob
Move forward to open the air passage
between the disk and the head, move
backward to close it.
EN
N° 0002933200
Gas inlet
N° 0002933196
Rev. 14/12/2004
43