Publicité
Les langues disponibles
Les langues disponibles
‼ NOTE
•
The console switches to standby mode when
the equipment is not used for 4 minutes. If
the console is in standby mode, the display
shows the room temperature
Explanation of buttons
Up (Dail)
-
Press UP Key to increase value. Press and hold
the key to increase value faster.
-
TIME setting range: 00:00~99:00 (Each
increment is 1:00)
-
CAL setting range: 0~9990 (Each increment is
10)
-
DIST setting range: 0.00~99.50 (Each increment
is 0.5)
-
PULSE setting range: 0-30~230 (Each increment
is 1)
Down (Dail)
-
Press DOWN Key to decrease value. Press and
hold the key to decrease the value faster.
-
TIME setting range: 00:00~99:00 (Each
decrement is 1:00)
-
CAL setting range: 0~9990 (Each decrement is
10)
-
DIST setting range: 0.00~99.50 (Each
decrement is 0.5)
-
PULSE setting range: 0-30~230 (Each
decrement is 1)
Mode/ Enter
-
Choose each function by pressing MODE/
ENTER key.
-
Press and hold MODE/ENTER key for 2
seconds to reset all functions (same feature as
the reset key if press for 2 seconds).
Reset
-
In setting mode, press RESET key once to reset
the current function figures.
-
Press RESET key and hold for 2 seconds to
reset all function figures
Recovery
-
After the console detects pulse signal, press
the RECOVERY key to enter recovery mode to
monitor heart rate recovery ability
Body Fat
-
Test body fat% and BMI.
Total reset
-
Console will restart over.
Explanation Display functions
Scan
-
In SCAN mode, press MODE/ENTER key to
choose functions.
-
Automatically scan through each mode in
sequence every 6 seconds.
-
The sequence of display when press MODE/
ENTER key : TIME » DIST » CAL » PULSE »
RPM/SPEED
Speed
-
Range 0.0 ~ 99.9
-
Without any signal being transmitted into the
monitor for 4 seconds during workout, SPEED
will display "0.0"
RPM
-
Range 0 ~ 999
-
Without any signal being transmitted into the
monitor for 4 seconds during workout, RPM will
display "0"
Time
-
Without setting the target value, time will count
up.
-
When setting the target value, time will count
down from your target time to 0 and alarm will
sound or flash.
-
Without any signal being transmitted into the
monitor for 4 seconds during workout, time will
STOP
-
Range 0:00~99:59
Distance
-
Without setting the target value, distance will
count up.
-
When setting the target value, distance will
count down from your target distance to 0 with
an alarm sound or flash.
-
Range 0.00~99.99
Calories
-
Without setting the target value, calorie will
count up.
-
When setting the target value, calories will
count down from your target calorie to 0 with
an alarm sound or flash.
-
Range 0~9999
1 9
English
Publicité
