DeWalt DWS780N Traduction De La Notice D'instructions Originale page 37

and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive
Mitre saw
DWS780, DWS780N
WALT declares that these products described under Technical Data are
D
e
in compliance with:
2006/42/EC, EN62841-1:2015/AC:2015; EN62841-3-9:2020 + A11:2020.
These products also comply with Directive 2014/30/EU; 2011/65/EU;
2019/2020/EU and 2019/2015/EU. For more information, please contact
D WALT at the following address or refer to the back of the manual.
e
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering PTE Europe
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
26.01.22
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY) REGULATIONS
DWS780, DWS780N
D WALT declares that these products described under "technical data" are
e
in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I. 2008/1597 (as
amended),
EN62841-1:2015/AC:2015; EN62841-3-9:2020 + A11:2020.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012, S.I. 2012/3032 (as amended).
The Ecodesign for Energy-Related Products and Energy Information
(Lighting Products) Regulations 2021, S.I. 2021/1095 (as amended).
For more information, please contact D
refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Karl Evans
Vice President Professional Power Tools EANZ GTS
D WALT UK,
e
270 Bath Road, Slough
Berkshire SL1 4DX
England
26.01.22
WALT.
e
2008
Mitre saw
WALT at the following address or
e
WALT.
e
WARNING: To reduce the risk of injury, read the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which,
if not avoided, may result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.
General Power Tool Safety Warnings

WARNING: Read all safety warnings, instructions, illustrations
and specifications provided with this power tool. Failure to follow
all instructions listed below may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b ) Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c ) Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b ) Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
c ) Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
d ) Do not abuse the cord. Never use the cord for carrying, pulling
or unplugging the power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e ) When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f ) If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3) Personal Safety
a ) Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in
serious personal injury.
EnGLISh
35