Telephoning; Accepting A Call; Turn Off The Ringer; Set Speaker/Loudspeaker Volume - Swissvoice Aeris 124 Mode D'emploi

Aeris 124

Telephoning

• Dial the desired number using the keypad.
• Press the Talk key or key
End the call
• Press the End call key.

Accepting a call

• Incoming calls are signalled by a ring tone on the handset.
• Press the Talk key or key
End the call
• Press the End call key.
Please note:Calls cannot be made if the battery is almost discharged or the
handset is out of range of the base station.

Turn off the ringer

Press key for approx. 3 seconds in standby mode: the ringer is switched off. To
turn the ringer on, press again key
When a call is signalled (you hear the ringtone), press key
off for this call.

Set speaker/loudspeaker volume

You can adjust the speaker/loudspeaker volume during a conversation (5 levels avail-
able).
Select the desired volume using the Navigation keys.

Switch handset off

• Press and hold the End call key (approx. 3 sec).
• Press and hold again the End call key to reactivate the handset.
54
.
and conduct your conversation.
for approx. 3 seconds.
. The ringer is turned
Aeris 124