steel G9F-4B Manuel D'utilisation page 95

Instructions for the installer
3.6 Fitting the telescopic guides (optional)
Proceed as follows to install:
remove the telescopic guides A from the packing and remove all protective film;
•
remove all the accessories that are inside the oven;
•
position the telescopic guide to the required height by coupling the upper side to the frame
•
(detailed drawing 1) and then rotate it until the lower side couples; repeat this operation for the
opposite side and the other levels;
slide the telescopic guides forward and position the chosen accessory as shown in detailed
•
drawing 2;
reinsert the previously removed accessories into the oven.
•
95