steel G9F-4B Manuel D'utilisation page 109

Instructions for the installer
4. Final operations
4.1 Fixing the free-standing cooking hob
Once the gas pipes and electric cables have been connected, the free-standing cooking hob must
be fixed to the support unit using the brackets A provided and the four screws B.
Make sure that the gas pipes and electric cables are not crushed or obstructed.
4.2 Levelling the cooker to the floor
After having made the electrical and gas hook-ups, level the cooker to the
floor using the adjustable feet that were previously screwed onto the bottom
of the cooker.
Should it be necessary to drag the cooker, screw the feet in completely and carry out the final
regulation only when the other operations are completed.
4.3 Adjustment of the drawer height
The clips of height adjustment are located in the
lower side and at the right and left ends of the
drawer.
By turning the lever A the drawer will raise of
3 mm.
109