Abus TVIP40000 Manuel Utilisateur page 96

You can use this function to create your own command buttons for operating and setting the connected
PTZ device in the live picture of the video server.
The specific button function is described using a hexadecimal code (depending on the applicable PTZ protocol).
All ABUS speed-dome cameras use the PELCO D/P protocol.
Up to 5 user-defined buttons can be created.
Enter the desired name of the button (e.g. Tour 1) under "Button name".
If you entered "Custom camera" as the camera protocol, you must define basic functions
such as "up", "down", "left" and "right" as custom commands. Refer to the manual for the PTZ
device for the applicable codes.
If you do not specify a button name, the button will not appear in the live picture.
The Pelco D/P protocol functions only with hexadecimal numbers.
Enter the HEX code for the desired function under "Command"
(e.g.: FF 01 00 09 00 01 0B).
The code must not include any spaces or special characters.
FF 01 00 09 00 01 0B

FF01000900010B
96
English