English
"Synchronise with computer time" Synchronises the date and the time of the video server with the local
computer. The read-only date and time of the PC are displayed following the update.
"Manual" Sets the date and the time according to the administrator's input. Note the date/time format when
entering in the respective fields.
"Automatic" Synchronises the date and time with the NTP server via the Internet every time the video server
is switched on. This is not possible if the respective time server cannot be reached.
"NTP server" Assigns the IP address or the domain name of the time server. If you leave this text box empty,
the video server is connected to the default time servers.
"DI and DO" Sets the pre-defined state for the alarm input and relay output.
Do not forget to press "Save" in order for your changes to take effect.
6.2 Security
"Root Password" Allows users to change the administrator password by entering a new password. For
security reasons, the passwords entered are shown as asterisks. After "Save" is clicked, the web browser
prompts the administrator to enter the new password for accessing the video server.
"Add new user" Enter the new user
name and password and click "Add".
The new user is displayed on the list
of user names. Up to twenty user
accounts can be configured.
"Edit users" Open the list of user
names, select the user that you wish
to edit, and change the required
values. To apply the changes,
click "Update".
"Delete user" Open the list of user names, select a user and click "Delete", to delete this user from the list.
User administration
Administrator: Complete unrestricted access to the video server.
Operator: No access to the configuration page. Can also execute URL commands (e.g. PTZ).
User: Access is restricted to the main page (live view).
Digital Output: The user group can control the alarm input and output.
PTZ control: The user group has access to the PTZ control.
Allow anonymous viewing: There is no prompt for a user name and password when the main page
is displayed.
78