Abus TVIP40000 Manuel Utilisateur page 90

"Select caching stream" The selected video stream is used for recording the pre- and post-alarm video data
(see "Application" section).
"Flip" Rotates the video horizontally. Select this option if the camera has been installed upside down.
"Mirror" Rotates the video vertically.
Select the flip and mirror options if the camera is installed on the ceiling.
"Overlay title and time stamp on video and snapshot" You can use this option to display the title and time
stamp directly in the video image and snapshots. The input for "Video title" is used here.
9.1 Image Settings
"Brightness, contrast, saturation, sharpness"
Adjust the values according to your lighting
conditions.
If the lighting conditions for the camera change, image settings for bad lighting conditions may
compromise the image quality of videos with good lighting conditions.
To view the changed settings for the image, click "Preview". To save the picture parameters, click "Save".
To discard your changes, click "Restore".
9.2 Privacy masking zones
This function allows you to hide areas
in the video image. You can select 5
areas of any size.
Enable this function by selecting the
"Enable privacy mask" option.
Click "New" to create a new window;
you can then adjust the size. Click
"Save", to apply the changes.
This function should not be enabled if the PTZ/ePTZ function of the camera is being used.
This function can only be configured if MS Internet Explorer is used as a browser (ActiveX mode).
90
English