English
"Trigger type" Select one or more characteristics which apply to a recording that was made on the SD card.
"Trigger time" Select the desired period.
Click "Search". All the recordings that meet your criteria are displayed in the list of results.
List of results
Number of entries on one page
Search
Scroll pages
"View" Shows the selected recording in a new window.
"Download" Allows you to download the selected recording.
"JPEGs to AVI" You can select several JPEG single picture recordings (selection box) and convert these into
an AVI file.
"Lock/Unlock" Individual recordings can be locked. Locked recordings will not be overwritten through cyclic
storage. Press the button again (unlock) to remove this attribute.
"Remove" The selected recording is deleted.
You can also evaluate the data stored on the SD card using the SD card reader on your PC. The recorded
data is displayed according to file type with the date and time in the file name.
16. Log file
Click this link on the configuration page to display the system log file. The contents of the file supply useful
information about the configuration and the connection following a system start. The standard of the log file is
RFC 3164. You can also send data to a log server. Enable "Remote Protocol" and enter the IP address and
the port number of the server.
17. Parameter list
Click this link on the configuration page to display all system parameter sets. This information can be provided
for support cases.
108