Environment; Troubleshooting - Festool KA 65 Guide D'utilisation

8
A
B 8-1
Do not dispose of the device as domestic waste!
Dispose of machines, accessories and packaging at
Problem
Machine stops operating.
18

Environment

an environmentally responsible recycling centre.
Observe the respective national regulations.

Troubleshooting

Possible causes
Flap [1-18] is open.
The supply of adhesive stops if
the flap is opened during opera-
tion. However, the feed mecha-
nism continues to operate.
Error message (appears on the
display [1-20]): edge band not
yet inserted.
Remedy
Close the flap [1-18].
Remove the edge band.