SMA SUNNY BOY STORAGE 3.8-US Instructions D'installation page 64

7 Commissioning
• Configuration with the installation assistant (recommended)
• Manual configuration
Adopting the Configuration from a File
You can adopt the inverter configuration from a file. To do this, there must be an inverter
configuration saved to a file.
Procedure:
1. Select the configuration option Adopting configuration from a file.
2. Select [Browse...] and select the desired file.
3. Select [Import file].
Configuring the Installation Assistant (Recommended)
A
C
Figure 19 : Layout of the installation assistant (example)
Position Designation
A Configuration steps
B User information
C Configuration field
Procedure:
1. Select the configuration option Configuration with Installation Assistant.
☑ The installation assistant will open.
2. Follow the installation assistant steps and make the settings appropriate for your system.
3. For every setting made in a step, select [Save and next].
☑ In the last step, all made settings are listed in a summary.
64 SBSxx-US-10-IA-xx-12
Description
Overview of the installation assistant steps. The number of
steps depends on the type of device and the additionally
installed modules. The current step is highlighted in blue.
Information about the current configuration step and the
setting options of the configuration step.
You can make settings in this field.
SMA Solar Technology AG
B
Installation Manual