SMA SUNNY BOY STORAGE 3.8-US Instructions D'installation page 26

5 Mounting
Dimensions for mounting:
46
(1.81)
32.8
(1.29)
Figure 8 : Position of the anchoring points(Dimensions in mm (in))
Recommended Clearances:
To guarantee optimal operation and adequate heat dissipation for the inverter, the following
requirements for clearances should be observed. This will prevent the inverter power output from
being reduced due to excessive temperatures. However, smaller clearances are permitted without
causing any risk.
26 SBSxx-US-10-IA-xx-12
411
(16.18)
362.4
(14.27)
306
(12.05)
9 x 18
(0.35 x 0.71)
SMA Solar Technology AG
46
(1.81)
Ø 9
(0.35)
266
(10.5)
Installation Manual