Moulinex MASTERCHEF ESSENTIAL QA151810 Mode D'emploi page 7

Warning: Read the "safety advice" booklet and these
instructions for use carefully before using your appliance for
the first time.
DESCRIPTION
A
Motor unit
A1 Speed selector dial
A2
Multi-function head release button
EN
A3
Multi-function head unit
A4
High-speed outlet
A5
High-speed outlet cover
A6
Mixer accessories outlet
A7
Low-speed outlet
A8
Low-speed outlet cover
B Bowl assembly
B1
Lid
B2
Bowl
C
Mixer accessories
C1
Mixe
GETTING STARTED
• Before using for the first time, wash all accessory parts in soapy water
(see "Cleaning" section). Rinse and dry.
• Place the appliance on a flat, clean and dry surface. Make sure that the speed selector dial (A1)
is in the "0" position and plug in your appliance.
• You have several options for starting your appliance (see A1 diagrams):
- Intermittent operation (pulse):
This pulse setting gives you better control when preparing food.
- Continuous operation:
Choose the desired position from "1" to "6/max." according to the food you are preparing.
• To stop the appliance, turn the dial (A1) to "0".
Important: The appliance will only start if the cover (A5) and the head (A3) are locked in
place. If you release the cover (A5) and/or the head (A3) while the appliance is running,
it will stop immediately. Lock the cover and/or the head into place again, turn the control
dial (A1) back to position "0", then continue to use the appliance as normal, selecting the
desired speed.
C2
Kneader
C3
Balloon whisk
D
Bol mini-hachoir (*selon modèle)
D1
Mini-chopper cover
D2
Mini-chopper bowl
E
Grinding head
E1
Metal body
E2
Screw
E3 Blade
E4 Large hole cutting plate
E5
Small hole cutting plate
E6
Nut
E7
Food pusher
E8
Tray
6
1 - MIXING / KNEADING / BEATING / EMULSIFYING / WHISKING
Depending on the nature of the food items, you can use the stainless steel bowl (B1) and its lid
(B2) to prepare up to 1.8 kg of light mixture.
ACCESSORIES REQUIRED:
Stainless steel bowl (B1), anti-splash lid (B2), kneader (C1) or mixer
(C2) or balloon whisk (C3).
1.1 - ASSEMBLY
Follow diagrams 1.1 to 1.4
1.2 - USAGE, TIPS AND DISASSEMBLY
• Start by turning the speed selector dial (A1) to the desired speed according to the recipe.
• You can add food through the hole in the lid (B2) during preparation.
• To stop the appliance, turn the dial (A1) to "0".
Tips:
KNEADING (maximum operating time: 10 minutes)
- Use the kneader (C1) at speed "1". You can knead up to 500 g of flour (e.g. white bread,
multi-grain bread, shortcrust pastry, sweet shortcrust pastry, etc.).
MIXING (maximum operating time: 10 minutes)
- Use the mixer (C2) at a speed between "1" and "6/max.".
- You can mix up to 1.8 kg of light mixture (pound cake, biscuits, etc.).
- Never use the mixer (C2) to knead heavy dough or fresh pasta dough (lasagne, rigatoni,
bigoli, etc.).
BEATING / EMULSIFYING / WHISKING (maximum operating time: 10 minutes)
- Use the balloon whisk (C3) at a speed between "1" and "6/max.".
- You can prepare mayonnaise, aioli, sauces, beaten egg whites (3–8 egg whites), Chantilly
cream (up to 800 ml), etc.
- Never use the balloon whisk (C3) to knead or mix light dough.
Disassembly:
Wait for the appliance to come to a complete stop, then perform the assembly steps
in diagrams 1.1 to 1.4 in reverse order.
2 - FINELY CHOPPING SMALL QUANTITIES (*DEPENDING ON MODEL)
ACCESSORIES REQUIRED (D*):
Mini-chopper lid (D1), Mini-chopper bowl (D2)
2.1 - ASSEMBLY
Follow diagrams 2.1, 2.2 and 2.3.
2.2 - USAGE, TIPS AND DISASSEMBLY
• With the mini-chopper you can chop the following very finely:
- Pork (belly), beef: 250 g / 5 secs / "Pulse".
- 100 g flour, 60 g water, 2 g yeast, 2 g salt: 10 secs / "Pulse".
• This mini-chopper is not intended for hard products such as coffee or for liquids.
Disassembly:
Wait for the appliance to come to a complete stop, then perform the assembly steps
in diagrams 2.1 to 2.3 in reverse order.
7
EN