Publicité
Figure 36
3.
WARNING!
Do not screw in the M4 screws present on the pump flange at a smaller
diameter, and marked with yellow enamel.
4.
TV
401/301 MS
User Manual / 87-901-013-01
Screw Engagement.
Use the torque wrench, set @ 10 Nm.
Screw in the 6 sphere-screws clockwise into the notched smooth
holes present on the flange, starting anywhere, and proceeding
1/2 turn/lap, until the pump flange is in contact with the
chamber flange (Fig. 37).
Technical Information
TV 401/301 MS Insertion and Extraction
(A)
17
249/264
Publicité
