Publicité
Playing in a Desired
Order - Program Play
Skipping to the next selection
programed
Press >
during playback.
Going back to the beginning of
the selection being played
Press KX] during playback.
To stop program play
Press Ml. The last selection number
programed will be displayed.
To resume playback, press [>. Play begins
from the beginning of the program.
You can play the same program repeatedly
as long as you do not cancel program play
or erase the program.
To program while observing the
disc labels
You can program the selections with the
disc table open.
To check the program contents
Press CHECK. Each time the button is
pressed, the program contents are
displayed in the programed order.
To cancel program play
Press CONTINUE and return to the
continuous playback mode. The program
will be erased.
To cancel all the selections
programed
Press Ml to cancel in stop mode.
If the disc table is opened or the power is
turned off, the program contents are also
erased.
To program for recording
After steps 1 to 3-A or 3-B3), press Il to
insert a pause and program the selections
for side B by performing step 3-A to 3-B3).
Wher the selections for side A have been
played, the unit will pause. ('B" lights up.)
Set the tape to the beginning of side B, then
press [> or EE.
The selections for side B will start playback.
Notes
* The playing time for selection numbers
higher than 20 will not be added into the
total playing time.
* When selections have been programed
for sides A and B, the display shows the
selections programed for side B and the
total playing time for side B in stop
mode.
Publicité
