Publicité
Getting Ready for
Dolby Surround
Tol Taye
Adjusting the Speaker
Volume
To enjoy the surround sound to the
maximum on playing any program sources,
adjust the front, rear, and center (if
connected ) speakers to the same volume
level. The adjustment must be done with a
test tone in the DOLBY SURROUND
mode,
but the level once adjusted can be used for
all surround modes.
You can adjust the volume level from your
listening position by using the remote
commander.
1 Press SURROUND ON/OFF to ON.
"SURROUND ON" and "DOLBY SUR"
appear on the display.
2 Press SURROUND MODE so that
"DOLBY SUR" appears on the
display.
3 Select the Dolby pro logic mode
with the DOLBY PRO LOGIC MODE
buttons on the main unit
according to your speaker system.
The selected mode is displayed.
4 Press T.TONE to set to on.
"TEST TONE" appears on the display
and the test tone will be heard from each
speaker in the following order.
in NORMAL or WIDE mode:
LEFT ——#
CENTER ——
RIGHT
(front)
(front)
REAR (L+R)
In PHANTOM mode:
a
FRONT ieee)
REAR (L+R)
In 3CH mode:
LEFT —~#
CENTER
——#
RIGHT
(front)
(front)
(continued)
Publicité
