Publicité
Les langues disponibles
Les langues disponibles
GB
ENGLISH
Never put your hands or feet on or under rotating parts.
Keep a distance from the ejection opening at all times.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and
damaged parts.
Never remove the collection bag when the machine is
being operated.
Never touch under the housing body when the engine is
running.
Keep the power source free of debris and other build-ups
to prevent damaging it or a possible fire.
Stop the device and disconnect it from the power supply
Wait until all rotating parts have stopped and the appli-
ance has cooled down.
• whenever you leave the lawnmower
• before removing blockages
• before checking, cleaning or working on the device
SPECIFIED CONDITIONS OF USE
The scarifier & raker may only be used for scarifying and
removing moss or for raking leaves, moss or weeds from
lawns in residential and hobby gardens – depending on
the attached roller.
The device may not be used in commercial applications.
Cut the grass to a height of about 40 mm before scari-
fying. The lawn must be dry when using the machine.
Do not force your rake through grass that is longer than
75mm. The lawn must be dry when using the machine.
WARNING
Risk of injury
Rotating blades may lead to serious injuries by cutting
or amputating parts of the body.
• Be careful to avoid injury by the cutting tools. Careful
appliance handling reduces the risk of injury by knife.
• Do not touch any dangerous moving parts before
the machine has been disconnected from the power
supply and the moving parts have come to a complete
standstill.
• All protection covers and safety devices must be correct-
ly attached to operate the device.
• Never use the machine with a damaged cover or protec-
tive device or without cover or protective devices.
SYMBOLS
Warning/caution!
Wear eye protective goggles !
Wear ear protectors!
22
• after contact with a foreign object, to check the device
for damage
• before freeing the device from accumulated material
• before tilting or transporting the device
Disconnect the machine from the power source and take
the following steps before restarting and operating the
machine:
• check for damage
• replace or repair damaged parts
• check for loose parts and tighten them
When working with this machine, do not use spare parts
other than those recommended by us. Using spare parts
not recommend by us can result in serious injuries to
persons or damage to the machine.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
Please note that permissible uses for the tool could be
limited by national regulations. It is necessary to comply
with the regulations applicable in the country where the
device is used.
Do not use the device near flammable liquids or gases.
Risk of fire and explosion in case of short circuit.
=
Cutting-Line
(do not print !)
144x37.5mm
IEVL 1840
230-240V~50Hz
1800
201x
400
Serial-No.: xxxxxxxxxxxxx
Ikra GmbH, Schlesierstraße 36, D-64839 Münster, Germany
www.ikra.de
129.2x54.2mm
Before any adjustment, cleaning and mainte-
nance work, switch off the device and discon-
nect it from the power supply.
Read the Operating Instructions!
Save all warnings and instructions for future
reference.
155x59mm
104
Made in China
Publicité
