Haojue NK150 2020 Mode D'emploi page 105

BCAUTION
Spilled brake fluid can damage painted surfaces
and plastic parts.
Be careful not to spill any fluid when filling
the brake fluid reservoir.
immediately.
Brake discs and brake pads
Essential in a brake disc inspection: inspect whether
brake disc thickness 1 is smaller than 3.5mm and, if it
is, replace the brake disc with a new one.
Essential in a wheel brake pad inspection:
whether the brake pad has been worn to or beyond the
limit line 2 and, if it has, replace the brake pad with a
new one.
BWARNING
After a new brake disc or pad is installed, do not
ride immediately but grasp and release the brake
handles or the brake pedal several times to make
the brake discs and pads fully fit with each other,
restore to their normal holding forces and have the
brake fluid circulate stably.
Haojue NK150 99011H40002H000 V02 ES+EN+FR 2020-1-17
Wipe spilled fluid up
inspect
42
Haojue NK150 99011H40002H000 V02 ES+EN+FR 2020-1-17
BWARNING
After a new brake disc or pad is installed, the
braking distance may be a little longer than the
original value. After the brake discs and brake
pads have realized full break-in following a mileage
of about 300km, the best braking effect will be
realized. Make sure there is an enough braking
distance when riding before that.
BWARNING
Fail to inspect and maintain the brakes pads or
brake disc, and replace them when recommended
can increase your chance of having an accident.
If you need to replace brake disc or brake pads,
have your Haojue dealer do these works. Inspect
and maintain the brake disc and brake pads as
recommended.
REAR BRAKE (DRUM BRAKE)
Adjustment of rear brake pedal
Free stroke 1 of the rear brake pedal refers to the stroke
between the pedal's free position and the pedal's position
when the pedal is stepped down on to brake the rear
(105)
EN
(105)