Haojue NK150 2020 Mode D'emploi page 73

NOTE: If the turn signal fails to work due to a broken bulb
or faulty wire connection, the indicator on the dashboard
will remain light up continuously or flicker at a high
frequency.
FUEL LOWER POSITION INDICATOR 2 $
Refer to fuel gauge .
NEUTRAL GEAR INDICATOR LIGHT 3 N
When the gear is in the neutral position, this indicator will
light up. If others, this indicator will be off.
HIGH BEAM INDICATOR LIGHT 4 9
The high beam light indicator will light up when the high
beam headlight is turned on.
OIL CHANGE INDICATOR 5 E
When the vehicle drives to a set mileage, the oil change
indicator light will automatically light up, reminding you
of changing the oil, so that you don't always have to
remember when the last replacement of oil was, to prevent
insufficiency, drying out or serious deterioration of oil,
thus causing damage to your vehicle's engine. Therefore,
changing your engine oil on a regular basis is very useful.
First light-up:
To ensure that you change your oil for the first time on
timely, the oil change light will light up for the first time
when the meter reaches the total mileage of 1000km.
NOTE: You must turn off the oil change indicator light
according to the "Turn-off Operation" after changing the
oil.
Haojue NK150 99011H40002H000 V02 ES+EN+FR 2020-1-17
Turn-off operation:
After pressing the ADJ button 7 and SEL button
seconds, a "3000" is displayed by flashing in the position
of the LCD screen showing the total mileage. Press the
ADJ button 7 or SEL button
and then press the ADJ button 7 and SEL button
seconds at the same time. The oil change indicator light
will flash 2 times before turning off.
Turn-off thereafter:
If the total mileage is 1100km, do the "Turn-off Operation"
when the LCD screen displays "3000" by flashing, then
the oil change light will automatically light up when your
motorcycle has a total mileage of 1100+3000; that is, the
total vehicle mileage is 4100km.
NOTE: After that, you must turn off the oil change indicator
light according to "Turn-off Operation" after changing the
oil.
RIGHT TURN SIGNAL INDICATOR LIGHT 6 8
When the turn signal switch is pushed to right, the panel
right turn signal indicator light will flicker accordingly.
NOTE: If the turn signal fails to work due to a broken bulb
or faulty wire connection, the indicator on the dashboard
will remain light up continuously or flicker at a high
frequency.
ADJ BUTTON 7
The ADJ button is used with the SEL button
oil change indicator 5 goes out. Refer to the "oil change
indicator" 5 section.
10
Haojue NK150 99011H40002H000 V02 ES+EN+FR 2020-1-17
(73)
for 2
to switch "2000" or "3000",
for 2
EN
when the
(73)