Haojue NK150 2020 Mode D'emploi page 100

(100) Haojue NK150 99011H40002H000 V02 ES+EN+FR 2020-1-17
BCAUTION
Use the engine
"Instructions for use of fuel and engine oil".
BCAUTION
Carefully inspect whether the engine parts that
have been dismantled and installed again suffer
any oil leakage.
Engine oil strainer
BWARNING
Due to that the cover of the right crankcase must be
removed before removing the strainer, whether the
strainer needs to be replaced should be determined
by the professional technical personnel of the
dealer.
EN
(100) Haojue NK150 99011H40002H000 V02 ES+EN+FR 2020-1-17
oil recommended in the
CLUTCH
Method to inspect the clutch cable gap 4: remove the
rubber bush 1 along the clutch cable, operate the clutch
handle and make sure there is a gap of 3–5mm before
there is an apparent resistance. If the gap is insufficient,
adjust it with the method below.
1. Remove the rubber bush 1 along the clutch cable,
loosen the nut 2.
2. Turn the adjusting screw 3 clockwise till the end.
3. Loosen the lock nut 5, adjust the nut 6 along
the front-back direction, operate the clutch lever and
adjust the clutch cable gap 4 to be 3–5mm.
4. Do fine adjustment through the adjusting screw 3.
5. Firmly lock the nut 2 and 5, and then mount the
rubber bushes 1.
BCAUTION
It's prohibited to intentionally increase the cable
clearance 4.
37