Publicité
Les langues disponibles
Les langues disponibles
(80)
Haojue NK150 99011H40002H000 V02 ES+EN+FR 2020-1-17
BWARNING
After the engine is started, inspect whether the kick
lever has been returned to its normal position.
BWARNING
Do not start with the kick starter until you have
grasped the clutch lever.
TOOL KIT
The tool kit is located in the tool box where it below the
left saddle cover. Insert key into the lock hole, turn the
EN
key counterclockwise to open the cover of tool box, take
out the tool kit.
SIDE STAND
The motorcycle is equipped with
a side stand.
When park the
motorcycle, stop the engine, then
rotate the side stand to lower limit,
leave your motorcycle on the side
stand slowly, confirming it is stable.
(80)
Haojue NK150 99011H40002H000 V02 ES+EN+FR 2020-1-17
BWARNING
Riding with the side stand incompletely stowed can
result in an accident when you turn left. Always
retract the side stand completely before starting
off.
BCAUTION
When parking, if the correct precautions are not
taken, the motorcycle will fall over.
motorcycle on a solid, flat surface can prevent it
from overturning. If the motorcycle is to be parked
on the side stand on a slight slope, the front end
of the motorcycle should face "up" the incline to
avoid rolling forward off the side stand. You may
leave the motorcycle in 1st gear to help prevent
it from rolling off the side stand. Shift to neutral
before starting engine.
INSPECT SIDE STAND RUBBER BLOCK
Inspect the rubber block on side
stand for malfunction or wear. If the
wear extends to the wear mark line,
replace the side stand rubber block.
Please have your Haojue dealer to
do this work.
1Wear mark line 2Side stand rubber block
17
Parking a
(A)
(B)
(A)Intact (B)Need to replaced
Publicité
