Husqvarna EBE 350 Manuel D'utilisation page 29

12. Remove the top liner.
13. Remove the impeller. Refer to
wheel blades on page 22 .
14. Use a brass drift and a hammer to push down the
blast wheel blades (A).
A
B
CAUTION:
the blast wheel blades. There is a risk
that the blast wheel blades break.
15. Remove and discard the blast wheel blades (B).
CAUTION:
in the blast wheel, it is necessary to
replace all 6 blast wheel blades at the
same time.
2111 - 002 - 14.12.2023
To remove the blast
Push at the bottom of
To prevent unbalance
16. Remove the screws that hold the separator.
17. Remove the separator.
18. Remove the protection handle.
29