Husqvarna EBE 350 Manuel D'utilisation page 24

To replace the front rubber seals
1. Lift the front part of the product and tilt the product
rearward.
WARNING:
product does not tilt forward.
2. Loosen the 6 nuts and then loosen the 3 bolts.
24
Make sure that the
3. Remove the 3 front rubber seals (A) and the metal
strip (B).
A
A
A
B
4. Install the new front rubber seals (C) with the steel
strips (D) between the front rubber seals. The angle
strip (E) is part of the body and can not come off.
E
D
5. Install the 3 bolts, tighten the inner nuts first and then
the outer nuts.
6. Put the front wheel on the surface.
D
C
C
C
2111 - 002 - 14.12.2023