Husqvarna EBE 350 Manuel D'utilisation page 14

Separator
The separator (A) holds the abrasive material and
supplies the blast wheel blades with abrasive material
through the hopper (B).
A
B
The separator tray keeps contamination away from the
abrasive material and the blast wheel blades.
To fill the product with abrasive
material
WARNING:
protective equipment when you fill the
product with abrasive material. Refer to
Personal protective equipment on page 6 .
14
Always use personal
1. Make sure that the valve for the abrasive material
To operate the valve for the
is closed. Refer to
abrasive material on page 11 .
2. Open the the separator door.
3. Open the separator tray and remove all
contaminations when you fill abrasive material or
when it is necessary.
4. Fill the separator with abrasive material up to
the separator tray. Fill the separator with abrasive
material when it is necessary.
To connect a dust collector
WARNING:
collector if the dust collector hose is
damaged. The risk increases that you
breathe in dust that is dangerous to your
health. Use approved respiratory protection.
Do not use the dust
2111 - 002 - 14.12.2023