Publicité
Les langues disponibles
Les langues disponibles
8.0 maintenance
8.1
cleaning
WARNING
• Always turn the heater off and unplug the power cord from the outlet before cleaning, performing
maintenance, or moving this appliance. Failure to do so could result in electric chock, fire, or personal injury.
• Never immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury.
Metal:
• Buff using a soft cloth, slightly dampened with a
citrus oil-based product.
• Do not use brass polish or household cleaners as
these products will damage the metal trim.
Glass:
• Use a good quality cleaner sprayed onto the cloth or towel.
Dry thoroughly with a paper towel or lint-free cloth.
• Never use abrasive cleaners, liquid sprays, or any
cleaner that could scratch the surface.
Batteries must be disposed of according to the local laws and regulations. Some batteries may
be recycled, and may be accepted for disposal at your local recycling center. Check with your
municipality for recycling instructions.
8.2 heater lockout switch
This fireplace features a switch positioned
above the touch panel, serving as an
additional mechanism to physically lock
out the heater's operation. When activated
the display will flash LOC any time the
heater function is pressed and not allow
the heater to turn on.
Vents:
• Use a vacuum or duster to remove dust and dirt
from the heater and vent areas.
Plastic:
• Wipe gently with a slightly damp cloth and a mild
solution of dish soap and warm water.
• Never use abrasive cleaners, liquid sprays, or any
cleaner that could scratch the surface.
W415-4173 / A-0 / 11.20.23
maintenance
EN
45
Publicité
