Publicité
Les langues disponibles
Les langues disponibles
operation
EN
ECO
Boost
Thermostat
Control
Flame
Flame Speed
Ember Bed
Color
36
W415-4173 / A-0 / 11.20.23
Hold the button for 3s to turn on/off heater with half heat output (ECO mode).
Note:
When running in ECO mode, ECO indicator will light up on the control panel.
Hold the button for 3s to turn on/off Boost mode for 30 mins.
Note: When running in Boost mode, BST indicator will light up
on the control panel.
Control the temperature of the appliance. Use
Settings:
18 ºC [64 ºF], 19 ºC [66 °F], 20 °C [68 ºF], 21 ºC [70 ºF], 22 ºC [72 ºF], 23 ºC
[74 ºF], 24 ºC [76 ºF], 25 ºC [78 ºF], 26 ºC [80 ºF], 27 ºC [82 ºF] et OFF.
Note: Press and hold the button for 3s to switch between °C and °F.
Turn the flame effect on/off.
Press the button, flame 1 icon on the LCD display will start to flash.
Use the
to change brightness.
Press the button again, flame 2 icon on the LCD display will start to flash.
Use the
to change brightness.
Press the button for a third time, both flame 1 and flame 2 icons on the LCD
display will start to flash.
Icon 1: Orange flame.
Icon 2: Yellow flame.
OF4 (100%)
YF4 (100%)
OF3 (75%)
YF3 (75%)
OF2 (50%)
YF2 (50%)
OF1 (25%)
YF1 (25%)
OF0 (0%)
YF0 (0%)
Control the flame speed.
Press the button, flame speed icon will start to flash on LCD display.
Use
to change settings.
Settings:
S-3 (12 RPM)
S-2 (10.5 RPM)
S-1 (9 RPM)
S-5 (15 RPM)
S-4 (13.5 RPM)
S-3 (12 RPM)
Control the ember bed color.
Press the button, ember bed color icon will start to flash on the LCD display.
Use
to change settings.
Settings:
L01
L02
...
L13
L-C (Cycle)
L01
to change settings.
Icon 1 + 2: Both flames.
F-1 Both flame on (100%)
F-0 Both flame off. (0%)
Publicité
