Publicité
Les langues disponibles
Les langues disponibles
For an end wall enclosure with 2 sides (front and 1 side)
install the top and bottom trims along with 1 C shaped
panel and 1 flat panel to the respected side which are
required to be open and closed.
2. For desired open side, remove the screws from the back of the fireplace which align with the trim then secure
the trim using the metal screws provided (Fig. 9).
3. For desired closed side, remove the screws from the back and bottom of the fireplace which align with the
panel then secure the panels using the metal screws provided (Fig. 10).
Side Panel
4. Secure both side trims by removing the screws
from the back of the fireplace which align with
the trim then secure the trim using the metal
screws provided. (Fig. 10).
Side Trim
note:
When installed fully recessed into the wall with one
side open, the appliance will have a front view and left-
or right-sided view depending on desired open side.
note:
When installed with both sides open, the appliance will
have a front view, as well as left- and right-sided views.
W415-4173 / A-0 / 11.20.23
installation
EN
Side Trim
Fig. 9
Side Trim
Fig. 10
21
Publicité
