Publicité
Les langues disponibles
Les langues disponibles
installation
EN
2.5
built in application
2.5.1 trim / panel installation
The Fireplace requires the use of additional trim and panels in order to be recessed fully into the wall to allow
a protective surface and butting edge for finishing material. Install the top and bottom trims with the mounting
brackets using the screws provided as shown. Review the installation options for single, 2 sided and 3 sided
applications and proceed with next steps for side trim and/or panel installation.
1. Remove the screws from the back and bottom of the fireplace which align with the panel then secure the
panels using the metal screws provided (Fig. 8).
Side Panel
20
W415-4173 / A-0 / 11.20.23
note:
When installed fully recessed into the wall
with both left and right sides covered, the
appliance will have a front view only.
Side Panel
Fig. 8
Publicité
