Publicité
Les langues disponibles
Les langues disponibles
2.4.2 unit preparation
1. Ensure front glass is removed from appliance
before installation prep (see front glass removal).
2. Place the appliance face UP on a soft,
non-abrasive surface.
3. Install the metal brackets to the rearmost set of
5. Insert the appliance into the rough framing by
securing the screws (supplied) through the slotted
holes on each securing bracket of the appliance
holes on the top of the fireplace using the screws
and washers (supplied).
4. Remove the power cord and complete hard-wiring
(see "hard-wiring installation" section).
into the rough framing. (Fig. 7).
6. Proceed to Finishing
W415-4173 / A-0 / 11.20.23
installation
EN
Fig. 7
19
Publicité
