Publicité
Les langues disponibles
Les langues disponibles
operation
EN
6.3
operating optional wall mount controller
Power
Flame On/Off
Mode
Selection
Thermostat
Control
38
W415-4173 / A-0 / 11.20.23
Turn the appliance on/off.
Turns the flame on/off.
Settings:
F-1: Flame on at 100% brightness for both orange and yellow flame (default setting)
F-0: Flame off
Switches between running modes.
Defualt setting: H-0
Settings:
H-0: Heater and blower off
FAN: Heater is off and blower is on
H-1: Heater and blower on
ECO: Heater running in economic mode
BST: Heater in enhance mode, blower running at high speed
Note: Heater control function can be enabled/disabled by holding the button for 3s. When
the heater function is disabled, "LOC" will be displayed.
Press this button to activate the thermostat. Continue pressing the same button to
increase the temperature setting. Each press will increment the temperature
by 1 °C (2 °F), starting from the default setting of 18 °C (64 °F).
To turn off temperature mode:
Repeatedly press the button until no temperature value is displayed, indicating "OFF."
The temperature setting will reset to the default value of 18 °C (64 °F).
Settings:
18 ºC [64 ºF], 19 ºC [66 °F], 20 °C [68 ºF], 21 ºC [70 ºF], 22 ºC [72 ºF], 23 ºC [74 ºF],
24 ºC [76 ºF], 25 ºC [78 ºF], 26 ºC [80 ºF], 27 ºC [82 ºF] and OFF.
Note: Press and hold the button for 5s to switch between ºC and ºF.
Publicité
