Assembly Of Safety Switches - Bosch CRS 845H Guide D'installation

6. Attach the door locks (Fig. 15, item 2) (2 pcs per
door). To do so, insert the star grip bolt into the
hole. Consecutively slide the spacer sleeve, door
lock and disc spring onto the bolt from the rear. Use
the self-locking nut to tighten the lock such that it
can still be easily turned.
M5
3
2
1
5
Fig. 15: Assembly of folding doors
7. Mount the fully assembled folding doors on the des-
ignated door hinges.
Fig. 16: Assembly of safety doors
Robert Bosch GmbH
4.2.4
1. Screw the plastic hexagon nut (Fig. 17, item 2) onto
M5
4
Fig. 17:
2. Insert the actuator (Fig. 18, item 1) into the hole of
3. Secure the actuator with the second plastic hexagon
Fig. 18:
Installation | CRS 845H | 35

Assembly of safety switches

the actuator (Fig. 17, item 1) until the plastic hexagon
nut is flush with the rear of the actuator.
1
2
Preparation of actuator
the folding door (see Fig. 18).
nut (Fig. 18, item 2). Tightening torque: 3 Nm.
1 2 2
Preparation of actuator
en
|
1 689 978 535 2014-10-21