Assembly Of Folding Doors - Bosch CRS 845H Guide D'installation

en 34 | CRS 845H | Installation
10. Affix the left side panel to the front protective
housing using hexagon socket head bolts and the
mounting plate (Fig. 12, item 1) (as used in step 1).
M5 x 10
1
Fig. 12: Assembly of left side panel
11. Adjust the screw-in base.
12. Affix the right side panel to the front protective
housing using hexagon socket head bolts and the
mounting plate (Fig. 13, item 1).
Fig. 13: Assembly of right side panel
13. Adjust the screw-in base.
|
1 689 978 535 2014-10-21
M6 x 16
1
1
4.2.3

Assembly of folding doors

1. Use the protective cover with a width of 514 mm
and countersunk holes (see Fig. 14).
2. Affix the hinge strip (Fig. 14, item 1).
3. Affix the cover strip (Fig. 14, item 2) using counter-
sunk bolts and hexagon nuts.
5 1 4
m m
1
M5
Fig. 14: Assembly of 518 mm folding door
4. Affix the hinge strip (Fig. 15, item 4) to the remain-
ing protective covers.
5. Affix the handle strip (Fig. 15, item 1) to the protec-
tive cover (Fig. 15, item 3) with the cover strip
(Fig. 15, item 5).
M5
2
Robert Bosch GmbH