KitchenAid Architect Serie Guide D'installation page 19

Refrigerator (42" [106.7 cm] Models)
Overlay
23%"
(59.40 cm)
ig"
3fyu (4.5 mm)
(9.7 mm)
VYag"
(1.5 mm)
Bao"
(2.38 mm)
Side Trim (42" [106.7 cm] Models)
Hg"
3/_n (4.5 mm)
(9.7 mm)
Vag"
(1.5 mm)
Ya"
(3.2 mm)
4
Ft
Inset Installation Dimensions
36" [91.4 cm] Models
1. Measure the distance from point A (as shown) to the back
wall. Add %2" (0.8 mm) to this measurement to allow the side
panel to fit into the trim.
2. Ifthe panel is more than %" (9.5 mm) thick, rout the front edge
to allow the side panel to fit into the trim
42" [106.7 cm] Models
1. Measure the distance from point A (as shown) to the back
wall. Add %2" (0.8 mm) to this measurement to allow the side
panel to fit into the trim.
2. Ifthe panel is more than %" (9.5 mm) thick, rout the front edge
to allow the side panel to fit into the trim
Recessed Inset Installation Dimensions
36" [91.4 cm] Models
1. Measure the distance from point A (as shown) to back wall.
2. Rout the front edge of the support board or attach a %"
(9.5 mm) board to hold the panel in the cabinet side trim.
42" [106.7 cm] Models
1. Measure the distance from point A (as shown) to back wall.
2. Rout the front edge of the support board or attach a %"
(9.5 mm) board to hold the panel in the cabinet side trim.
19