KitchenAid Architect Serie Guide D'installation page 10

e designed so that there is sufficient clearance for the doors to swing open. If
the refrigerator is to be installed close to the wall, see "Door Swing 90°" on next page.
Door Swing 110°
Actual Size
Refrigerator to
Cabinetry Clearance
Refrigerator
Side Trim
---- 1/4" (6.35 mm)
'
'
'
'
'
'
'
nosbh--==- Yo" (1.3. em)
froneass 3/4" (1.9 om)
woes donde bow hdenwwene one 1" (2.5 cm)
' NOTE: Allow 12"
\ \ (1.3 cm) clearance
, between overlay
'4, panel and cabinetry.
' 1 W \ \
(25cm),
t/a"
NOTE: For Overlay Series models, rout the (3.2 crm)'
hinge side of the custom door panels to a 11/2"
radius that is equal to at least half the (3.8m)
thickness of the panel if a 130° door swing is
desired. See "Adjust Doors."
i Spacer Panel
When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinetry to some degree.
10