Télécharger Imprimer la page

KitchenAid Architect Serie Guide D'installation page 14

Masquer les pouces Voir aussi pour Architect Serie:

Publicité

Les langues disponibles

Les langues disponibles

Overlay Series
5
& &
P i n a
H o e l taot
Custom overlay panels allow you to blend the exterior of your
refrigerator into the overall kitchen décor and to use custom
handles for additional design flexibility.
The custom panels must have backer panels attached in order to
mount them to the refrigerator. It is most common to work with
three panels, as shown in the following graphic: a decorative
overlay panel, a '/s" (3.18 mm) spacer panel or spacer strips and a
1/4" (6.35 mm) backer panel.
Overlay Panel
Spacer Panel
Spacer Panel
tie
aig)
Overlay Panel
.
Backer Panel
t<——
1° minimum
rn
(540m) -----
|
Door/Grille Trim
5/s" to 3/4"
Offset Dimension
(15.88 to
ae
'
19.05
/a"
(6.35 mm)
mm)
@tem
'a
'
Backer Panel
kT be
In some
cases, your cabinet manufacturer may choose to work
with one panel routed for the different dimensions. Follow these
panel dimension and placement instructions to be sure that the
custom overlay panels will fit properly.
IMPORTANT:
mg
For 36" (91.4 cm) models, the refrigerator door overlay panel
cannot exceed 50 Ibs (23 kg) and the freezer drawer overlay
panel cannot exceed 20 Ibs (9.1 kg).
mg
For 42" (106.7 cm) models, the refrigerator door overlay panel
cannot exceed 30 lbs (13.5 kg) and the freezer drawer overlay
panel cannot exceed 25 lbs (11.4 kg).
mg
The weight of the top grille overlay panel cannot exceed
10 Ibs (4.5 kg) for both models.
To minimize panel weight, you may use 2" (5.08 cm) spacer strips
around the perimeter in place of full-sheet solid spacer panels.
The spacer strips must be set in at least 1" (2.54 cm) from the top,
bottom and side edges of the backer panel. If you use spacer
strips, it is also recommended that you use two 2" (5.08 cm) strips
horizontally centered for added support.
Custom Overlay Panels (36" [91.4 cm] Models)
7"
(18.42 cm)
34%,"
(88.27 cm)
TOP GRILLE PANEL
Maximum Weight: 10 Ibs (4.5 kg)
|\<—_——
——_——_>
34%,"
Sa
aaa
(88.27 cm)
<——_
51%"
REFRIGERATOR DOOR PANEL
(129.86 cm)
Maximum Weight: 50 Ibs (23 kg)
Vv
34%,"
——_—_—_—_—
SE
aaeel
(88.27 cm)
20%"
FREEZER DOOR PANEL
(52.71 cm)
Maximum Weight: 20 Ibs (9.1 kg)
14
Custom
Backer Panels (36" [91.4 cm] Models)
33%"
(85.73 cm)
Center
Backer
Panel
left to
right
A Bottom Offset
¥s" (9.5 mm)
——"|
6%"
A :
(15.72em)_¥_
| :
Y_ 4|
j
3444"
(87.00 cm)
Center
Backer
-——- Panel
left to
right
49%,"
(124.78 cm)
A Bottom Offset
7/6" (11.1 mm)
34%"
(87.00 cm)
Center
Backer
vmomm Panel
i
i
20%16"
i
'
left to
i
i
i
i
a
1 (51.28 cm)
a
i
a
|
'
right
A
Bottom Offset
¥4" (6.35 mm)

Publicité

loading