KitchenAid Architect Serie Guide D'installation page 16

All factory parts al are available through your KitchenAid dealer or by
calling KitchenAid Parts and Accessories at 1-800-442-9991. In
Canada, call 1-800-807-6777.
Architect® Series 72" (183 cm) Top Grille Panel Kit
A 72" (183 cm) wide Top Grille Panel Kit is available. This kit allows
2 units (one left-hand swing and one right-hand) to be installed
side by side with a single grille.
Color 72" (183 cm)
#W10153554
Stainless Steel (Architect® Series)
Extended Door Handle Kits
Use extended door handles when additional finger clearance is
needed between the door handles and custom panel. Follow the
kit instructions for installing the door handles.
Color Left-Hand Swing | Right-Hand
Swing
White (Classic #4396119 #8171424
Series)
Black (Classic #4396116 #8171427
Series)
Stainless Steel #4396118 #8171425
(Classic Series)
Matte Aluminum #4396120 #8171423
Etched (Classic
Series)
Matte Aluminum #4396718
(Overlay Series)
If you plan to install custom wood ses you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT: Panels weighing more than recommended may
cause damage to your refrigerator.
NOTE: Dimensions shown have a (+)"%e" (1.5 mm) tolerance.
Panels that are more than 14" (6.35 mm) thick must be routed. If
panels are less than 1%" (6.35 mm) thick, install a filler panel
between the door and the decorative panel.
Top Grille Panel
The top panel should not weigh more than 10 Ibs (4.5 kg).
74"
(18.4 cm)
3415"
(87.63 cm)
16
Refrigerator and Freezer Panels
The freezer panel should not weigh more than 20 Ibs (9.1 kg). The
refrigerator panel should not weigh more than 50 Ibs (22 kg).
34 V4"
j<«<———._ (87cm) ———>|
49"
(124.5 em)
3444"
}<——— _ (87cm) ———>|
7
20%"
(51.1 cm)
Top Grille Panel - Routing Requirements
If the custom panels are thicker than 1%" (6.35mm), the top and
bottom edges of the top panel should be edge routed 1%"
(1.27 cm) and %" (9.5 mm), respectively. Both ends should be
edge routed '4" (2.2 cm) as shown.
Ya" Yn
(6.35 mm) $ 4 (6.35 mm)
max. Top Top max.
Grille Grille
Tat Ty"
(2.2 cm) (2.2 cm)