Chattanooga Intelect Transport 2 Mode D'emploi page 15

DETAIL DEVICE DESCRIPTION 15
CHARGING THE BATTERY PACK
The battery pack is automatically charged by the unit whenever
there is mains power connected. Charging may be interrupted
during operation of the unit by the control circuitry to limit
total power consumption. A fully charged battery will provide
1.5-3 hours of treatment depending on the applicator and the
pulsed mode used.
NOTE: Even when the battery pack is connected, the unit will
default to mains power when plugged in.
USING THE BATTERY PACK
To save battery power, the Intelect Transport 2 devices are
equipped with a "power off" function. This function is activated
when the unit is powered on and has been left idle for
approximately 5 minutes, at which time the unit powers off.
To restore power, press the Power On/Off button.