How To Use - Elite Super Crono Hydromag Digital Mode D'emploi

GB
Attention: Inputting an incorrect value will process
incorrect data during your training sessions.
Example: You want to set the following units of
measurement: kilometres, metres, kilograms and
input your personal weight which is 78 kg.
To access the SET UP screens keep pressed the
MODE key for at least 3 seconds. Press SET un-
til METER, KILO and KM/H appear on the screen.
Then press the MODE key. Press the SET key until
the flashing digit (first from the right) becomes
"8". Then press MODE. Press the SET key until
the flashing number (middle) becomes "7". Then
press MODE. Press the SET key until the flashing
number (first from the left) becomes "0". Then
press MODE. Press the SET key until the flashing
number becomes "2". Then press MODE. Now you
are ready to go!

How to use

During the run, you can select from four different
screens. Each screen is divided in seven parts
with different information displayed in each one.
During the run, you can toggle through the screens
at will with the MODE key.
During the run, you can adjust the resistance level
with the remote shifting lever. The console will au-
tomatically indicate the gear shift position on the
screen and up-date some values (i.e. slope).
Starting a run
To start a run simply press ADJUST or MODE or
simply start pedalling.
Information available during the run.
SYMBOL SCREEN
WATT 1
KM/H- M/H 1
%
1
DST
1-2
TIME 1-2
1 2 3 4 5
1-2-3
1-2-3
AVG WATT 2
AVG KM/H-M/H
2
% AVG 2
MAX WATT
3
MAX KM/H
3
ELV.G 3
ODO 3
10
TOTAL TIME
3
3
1 Supercrono HydroMag Dgt.indd 10
Current power. Power developed the moment you read the value on the screen.
Current speed. The speed you are proceeding the moment you read the value on the screen.
Slope. The slope value is in function of the cyclist's weight and the resistance level/gear shift position.
Distance covered since training commenced. Indicates the distance covered from the starting point.
Race duration. Indicates the time passed since training commenced.
Resistance level/Gear shift position. Indicates the gear shift position of the resistance unit.
Indicator . Indicates if the current speed is higher (
Average power. Indicates the average power developed since training commenced.
Average speed. Indicates the average speed since training commenced.
Average slope. Average slope of the run.
Maximum power. Indicates the peak on power during the run.
Maximum speed. Indicates the peak on speed during the run.
Elevation gain. Indicates the elevation gained during the run.
Total distance covered. Indicates the total distance covered by your Digital Mag.
Total time. Indicates the total time your Digital Mag has been used.
Flat battery indicator.
SCREENS
1 screen:
st
A Current power
B Current speed
C Slope/current incline
D Distance
E Course time
F Resistance level/gear
shift position
G Indicator
2 screen:
nd
A Average power
B Average speed
C Average slope/incline
D Distance
E Course time
F Resistance level/gear
shift position
G Indicator
3 screen:
rd
A Maximum power
B Maximum speed
C Elevation gain
D Total distance
E Total time
F Resistance level/gear
shift position
G Indicator
INFO
) or lower ( ) than the average speed.
05/11/09 12:21